Good deals
Welcome to the Good Deals category of our website! Spend some time here, in order to find earlier versions of microcontrollers, electronic components and even high performance servomotors! Don't hesitate to come back often to see our latest deals!
This cable for SICK laser range finders has a 12-pin female connector for quickly connecting your installation.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Use the proper bolts for fixing your Dynamixel servos!
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
This case is designed to protect your precious little Raspberry Pi 3 from accidents, while remaining very practical for making the most of your programming board.
Good news for all Raspberry Pi enthusiasts: the Raspberry Pi Zero WH board offers all the features of a Pi Zero, plus an already soldered GPIO 40-pin header!
With the Raspberry Pi PoE HAT, you can use a simple Ethernet cable to power your Raspberry Pi 3 B+ through compatible Power over Ethernet networks.
To celebrate its 4th birthday, the Raspberry Pi Foundation is releasing the Raspberry Pi 3! It’s 50% more powerful than the previous version, but above all comes already equipped with WiFi and Bluetooth! It's also compatible with the Pi2 accessories.
This high-quality acrylic case will protect your Raspberry Pi 4 from scratches and dust, while giving easy access to all its ports.
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
PincherX 150 is the new robot arm by Trossen Robotics, designed to showcase the Dynamixel (X-Series) servo technology in a sleek, customisable machine.
Make sure you get off to a flying start with this Official Raspberry Pi 3 B Starter Kit. It is a complete kit that includes a RasPi 3 B board and 6 accessories to begin your electronic and IoT projects without a hitch.
This bracket set for Dynamixel MX-64 or MX-106 servos is great for creating a new joint on your robotics project.
Equip your board with a mini camera for Raspberry Pi Zero and experiment with new video projects.
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
Power cable for an LMS111 or TIM551 type Sick laser scanner
The D415 camera is another member of the small family of depth cameras developed by Intel® RealSense. It’s designed for developers in need of high perceptual accuracy, even at a distance of several metres.
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
