Good deals
Welcome to the Good Deals category of our website! Spend some time here, in order to find earlier versions of microcontrollers, electronic components and even high performance servomotors! Don't hesitate to come back often to see our latest deals!
Use the proper bolts for fixing your Dynamixel servos!
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
The Trossen Robotics 350 mm 3-pin cable is a go-to Dynamixel actuator project accessory.
The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
This heavy duty 3-pin ribbon cable is compatible with the Dynamixel AX and MX actuators.
This high-quality acrylic case will protect your Raspberry Pi 4 from scratches and dust, while giving easy access to all its ports.
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
This case is designed to protect your precious little Raspberry Pi 3 from accidents, while remaining very practical for making the most of your programming board.
With this Dean/Jack adapter cable, you can easily connect a LiPo or Li-ion battery to your project.
This set of four 150 mm 2P Cables (Gearmotor) is a reliable means of connecting your gearmotor to its battery housing.
This 150 mm 2P Cable (Battery Box) (x 4) set by Robotis allows you to establish a secure connection between your servo motors and their battery housing.
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
This "squid" power cable allows you to connect up to 6 devices /modules to a single power supply, without removing the soldering iron.
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.
4 cables (400m length) with 5 pin connectors for some Dynamixel servomotors, sensors and controllers (CM-100, CM-150, CM-530, CM-700).
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
Equip your board with a mini camera for Raspberry Pi Zero and experiment with new video projects.