Good deals
Welcome to the Good Deals category of our website! Spend some time here, in order to find earlier versions of microcontrollers, electronic components and even high performance servomotors! Don't hesitate to come back often to see our latest deals!
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
To celebrate its 4th birthday, the Raspberry Pi Foundation is releasing the Raspberry Pi 3! It’s 50% more powerful than the previous version, but above all comes already equipped with WiFi and Bluetooth! It's also compatible with the Pi2 accessories.
Good news for all Raspberry Pi enthusiasts: the Raspberry Pi Zero WH board offers all the features of a Pi Zero, plus an already soldered GPIO 40-pin header!
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
This heavy duty 3-pin ribbon cable is compatible with the Dynamixel AX and MX actuators.
The Trossen Robotics 350 mm 3-pin cable is a go-to Dynamixel actuator project accessory.
The D415 camera is another member of the small family of depth cameras developed by Intel® RealSense. It’s designed for developers in need of high perceptual accuracy, even at a distance of several metres.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
With the Raspberry Pi PoE HAT, you can use a simple Ethernet cable to power your Raspberry Pi 3 B+ through compatible Power over Ethernet networks.
Make sure you get off to a flying start with this Official Raspberry Pi 3 B Starter Kit. It is a complete kit that includes a RasPi 3 B board and 6 accessories to begin your electronic and IoT projects without a hitch.
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
With this Dean/Jack adapter cable, you can easily connect a LiPo or Li-ion battery to your project.
The CS-10 color sensor can detect up to 6 colors.