Good deals
Welcome to the Good Deals category of our website! Spend some time here, in order to find earlier versions of microcontrollers, electronic components and even high performance servomotors! Don't hesitate to come back often to see our latest deals!
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
10 cables (6cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
Power cable for an LMS111 or TIM551 type Sick laser scanner
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
4 cables (400m length) with 5 pin connectors for some Dynamixel servomotors, sensors and controllers (CM-100, CM-150, CM-530, CM-700).
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
To celebrate its 4th birthday, the Raspberry Pi Foundation is releasing the Raspberry Pi 3! It’s 50% more powerful than the previous version, but above all comes already equipped with WiFi and Bluetooth! It's also compatible with the Pi2 accessories.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.
This set of four 150 mm 2P Cables (Gearmotor) is a reliable means of connecting your gearmotor to its battery housing.
This 150 mm 2P Cable (Battery Box) (x 4) set by Robotis allows you to establish a secure connection between your servo motors and their battery housing.
Use the proper bolts for fixing your Dynamixel servos!
The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.
This case is designed to protect your precious little Raspberry Pi 3 from accidents, while remaining very practical for making the most of your programming board.
Good news for all Raspberry Pi enthusiasts: the Raspberry Pi Zero WH board offers all the features of a Pi Zero, plus an already soldered GPIO 40-pin header!